ME201

Thermodynamics

7 Files
•
Updated 2020
Download Progress 0/7 files
Unit 1 - Basic Concepts
Notes Not downloaded 1.6 MB
Unit 2 - First Law
Notes Not downloaded 1.3 MB
Unit 3 - Second Law
Notes Not downloaded 914 KB
Unit 4 - Properties
Notes Not downloaded 605 KB
Unit 5 - Psychrometry
Notes Not downloaded 730 KB
Important Questions
Study Not downloaded 3.3 MB
Question Paper
Exam Not downloaded 160 KB
Academic Curriculum Guide

Applied Engineering Thermodynamics: Master Reference & Syllabus Guide

Engineering Thermodynamics is the foundational discipline governing energy conversion, work-heat interactions, power generation, and refrigeration. This comprehensive academic guide breaks down the standard AICTE, Anna University, and State Technical University syllabus into clear theoretical modules, derivations, formula sheets, and university examination solutions.

Unit-by-Unit Theoretical Foundations

Unit 1: Fundamental Concepts & Zeroth Law

Thermodynamics analyzes macroscopic states of matter undergoing energy transfers. The macroscopic viewpoint considers bulk behavior without modeling individual molecular trajectories, making it practical for industrial engine and turbine analysis.

  • Thermodynamic Systems: Categorized as Closed System (fixed mass across boundaries, energy transfer permitted), Open System / Control Volume (mass and energy flow across control surfaces), and Isolated System (neither mass nor energy crosses boundaries, e.g., universe).
  • Thermodynamic Properties: Intensive properties are independent of mass (pressure P, temperature T, density ρ), whereas Extensive properties depend directly on mass or system extent (total volume V, internal energy U, enthalpy H). Specific properties (per unit mass) are intensive.
  • State Postulate: The thermodynamic state of a simple compressible system is completely specified by two independent, intensive properties.
  • Quasi-Static Process: An idealized departure from equilibrium that proceeds infinitely slowly, ensuring the system remains in internal equilibrium at every instant, allowing integration along continuous process curves.
  • Zeroth Law of Thermodynamics: If bodies A and B are each in thermal equilibrium with a third body C, then A and B are in thermal equilibrium with each other. This law forms the physical foundation of thermometry and temperature scales (Celsius, Kelvin, Fahrenheit).

Unit 2: First Law of Thermodynamics & Steady Flow Energy Equation (SFEE)

The First Law is the principle of conservation of energy applied to thermodynamic systems. For a closed system undergoing a cycle, net heat transfer equals net work done: ∮ dQ = ∮ dW.

  • Non-Flow Closed System Process: Q - W = ΔU, where Q is heat transfer (+ve into system), W is boundary work (+ve done by system), and U is internal energy (a property of state).
  • Boundary Work (pdV): Calculated as W = ∫ P dV. For an isothermal ideal gas process: W = P1·V1·ln(V2/V1). For a reversible adiabatic process: W = (P1·V1 - P2·V2) / (γ - 1). For a polytropic process (PV^n = C): W = (P1·V1 - P2·V2) / (n - 1).
  • Steady Flow Energy Equation (SFEE): Governing open systems operating at steady state across inlet (1) and exit (2):
    h1 + (V1² / 2000) + (g·Z1 / 1000) + q = h2 + (V2² / 2000) + (g·Z2 / 1000) + w (all units in kJ/kg).
  • Engineering Device Applications:
    • Steam / Gas Nozzle: q = 0, w = 0, ΔZ = 0 → Exit velocity V2 = √(2000·(h1 - h2) + V1²).
    • Turbine: q ≈ 0, ΔKE, ΔPE ≈ 0 → Shaft work output w = h1 - h2.
    • Compressor / Pump: q ≈ 0 → Work input required w_in = h2 - h1.
    • Throttling Valve: Isenthalpic process, h1 = h2, temperature drops for gases exhibiting positive Joule-Thomson coefficient (μ_JT > 0).

Unit 3: Second Law of Thermodynamics, Clausius Inequality & Entropy

While the First Law asserts energy conservation, it cannot predict process directionality. The Second Law establishes that heat flows spontaneously only from higher to lower temperatures and that complete conversion of heat into work is fundamentally constrained.

  • Kelvin-Planck Statement: It is impossible for any device operating on a cycle to receive heat from a single thermal reservoir and produce a net equivalent amount of work (prohibits perpetual motion machines of the second kind, PMM-II).
  • Clausius Statement: It is impossible to construct a cyclic device that transfers heat from a lower-temperature reservoir to a higher-temperature reservoir without external work input.
  • Equivalence of Statements: A violation of Kelvin-Planck leads directly to a violation of Clausius, and vice versa.
  • Carnot Theorem: No heat engine operating between two fixed thermal reservoirs can be more efficient than a totally reversible Carnot engine operating between the same two temperatures. Reversible thermal efficiency is η_th,rev = 1 - (T_L / T_H).
  • Clausius Inequality: ∮ (dQ / T) ≤ 0, where equality holds for reversible cycles and inequality for irreversible cycles. This mathematical relation defines the property Entropy (S), where dS = (dQ / T)_rev.
  • Principle of Entropy Increase: For an isolated system or universe, ΔS_universe = ΔS_system + ΔS_surroundings ≥ 0. All real, spontaneous processes generate positive entropy (S_gen > 0).

Unit 4: Pure Substances, Steam Properties & Vapor Power Cycles

A pure substance possesses a fixed chemical composition throughout (e.g., water, refrigerants, nitrogen). Phase transformations between solid, liquid, and vapor are analyzed on p-v, T-s, and h-s (Mollier) diagrams.

  • Saturation States: Subcooled liquid, saturated liquid (dryness fraction x = 0), wet vapor mixture (0 < x < 1), dry saturated vapor (x = 1), and superheated vapor.
  • Steam Quality / Dryness Fraction: Defined as mass of dry vapor divided by total mass: x = m_v / (m_v + m_l). Properties in the wet region: h = h_f + x·h_fg, s = s_f + x·s_fg, and v = v_f + x·v_fg.
  • Critical Point of Water: P_cr = 22.064 MPa, T_cr = 373.95 °C, where liquid and vapor phases merge with identical densities, eliminating latent heat of vaporization (h_fg = 0).
  • Simple Rankine Cycle: The standard ideal model for steam power plants:
    • 1-2: Isentropic pumping of liquid in feed pump (W_p = v·(P_boiler - P_condenser)).
    • 2-3: Constant-pressure heat addition in boiler (Q_in = h3 - h2).
    • 3-4: Isentropic expansion of steam in turbine (W_t = h3 - h4).
    • 4-1: Constant-pressure heat rejection in condenser (Q_out = h4 - h1).
  • Thermal Efficiency: η_Rankine = (W_t - W_p) / Q_in = ((h3 - h4) - (h2 - h1)) / (h3 - h2). Performance is boosted in practice via reheat and regenerative feedwater preheating cycles.

Unit 5: Air-Standard Gas Power Cycles & IC Engine Thermodynamics

Internal combustion engines and gas turbines are modeled using idealized air-standard assumptions, treating the working fluid as a constant mass of ideal air with constant specific heats.

  • Otto Cycle (Spark Ignition / Petrol Engines): Four reversible processes:
    1. Isentropic compression (1-2) with compression ratio r = V1 / V2.
    2. Constant-volume heat addition (2-3) through spark ignition (Q_in = m·c_v·(T3 - T2)).
    3. Isentropic expansion / power stroke (3-4).
    4. Constant-volume heat rejection (4-1) via exhaust blowdown (Q_out = m·c_v·(T4 - T1)).
    Air-standard efficiency: η_Otto = 1 - (1 / r^(γ - 1)), where γ = c_p / c_v ≈ 1.4.
  • Diesel Cycle (Compression Ignition Engines): Fuel injection occurs at constant pressure during combustion (2-3): Air-standard efficiency: η_Diesel = 1 - [1 / (γ · r^(γ - 1))] · [(r_c^γ - 1) / (r_c - 1)], where r_c = V3 / V2 is the fuel cut-off ratio. For equal compression ratios, η_Otto > η_Diesel; however, practical diesel engines operate at much higher compression ratios (16-22) without knock, achieving higher thermal efficiency in practice.
  • Brayton Cycle (Gas Turbine Power Plants): Comprises isentropic compression in axial compressor, constant-pressure heat addition in combustion chamber, isentropic expansion in turbine, and constant-pressure heat rejection. Efficiency depends solely on pressure ratio r_p = P2 / P1: η_Brayton = 1 - (1 / r_p^((γ - 1)/γ)).

Thermodynamic Formula & Relations Matrix

Direct formula reference for university numerical problems, GATE, and competitive engineering exams:

Parameter / Law Mathematical Equation Key Conditions & Units
First Law (Closed Non-Flow) Q - W = ΔU = m·c_v·(T2 - T1) Ideal gas, constant c_v, SI: Joules or kJ
Isothermal Process Work W = P1·V1·ln(V2 / V1) = m·R·T·ln(P1 / P2) Reversible, constant T, ideal gas
Polytropic Process Work W = (P1·V1 - P2·V2) / (n - 1) General index n ≠ 1, boundary work in Joules
Steady Flow Energy Eq. (SFEE) h1 + V1²/2000 + gZ1/1000 + q = h2 + V2²/2000 + gZ2/1000 + w Steady state flow, all terms in kJ/kg
Carnot Heat Engine Efficiency η_Carnot = 1 - (T_L / T_H) = (T_H - T_L) / T_H T_H, T_L in absolute Kelvin (K)
Coefficient of Performance (Refrig.) COP_R = Q_L / W_in = T_L / (T_H - T_L) Reversible refrigeration cycle, absolute temperatures
Coefficient of Performance (Heat Pump) COP_HP = Q_H / W_in = COP_R + 1 = T_H / (T_H - T_L) Always strictly greater than 1.0
Entropy Change (Ideal Gas) Δs = c_p·ln(T2/T1) - R·ln(P2/P1) = c_v·ln(T2/T1) + R·ln(v2/v1) Specific entropy change in kJ/(kg·K)
Wet Steam Enthalpy & Entropy h = h_f + x·h_fg  |  s = s_f + x·s_fg x is dryness fraction (dimensionless, 0 to 1)
Air-Standard Otto Efficiency η_Otto = 1 - [1 / r^(γ - 1)] r = V1/V2 (compression ratio), γ ≈ 1.4
Air-Standard Brayton Efficiency η_Brayton = 1 - [1 / r_p^((γ - 1)/γ)] r_p = P2/P1 (pressure ratio)

University Examination Q&A & Conceptual Solutions

Q1: Why is the COP of a heat pump always greater than the COP of a refrigerator operating between identical temperature limits?

A refrigerator's desired output is the heat extracted from the cold refrigerated space (Q_L), yielding COP_R = Q_L / W_net. A heat pump's desired output is the heat delivered to the warm conditioned space (Q_H), yielding COP_HP = Q_H / W_net. From the First Law of Thermodynamics, energy conservation dictates Q_H = Q_L + W_net. Dividing both sides by W_net gives COP_HP = (Q_L / W_net) + 1 = COP_R + 1. Thus, the heat pump COP is mathematically and physically always greater by exactly 1.

Q2: What is the physical significance of Clausius Inequality and how does it differentiate reversible from irreversible processes?

Clausius Inequality states that for any closed thermodynamic cycle, the cyclic integral ∮ (dQ / T) ≤ 0. When ∮ (dQ / T) = 0, the cycle is totally reversible without internal friction or unrestrained expansions, enabling entropy to be defined as an exact point property (dS = dQ_rev / T). When ∮ (dQ / T) < 0, internal irreversibilities (fluid friction, rapid expansion, heat transfer across finite temperature differences) generate entropy, reducing the available work output. If ∮ (dQ / T) > 0, the cycle violates the Second Law and is thermodynamically impossible.

Q3: Write the Steady Flow Energy Equation (SFEE) and simplify it for an insulated steam turbine operating at high velocity.

The general SFEE per unit mass of working fluid is:
h1 + (V1² / 2000) + (g·Z1 / 1000) + q = h2 + (V2² / 2000) + (g·Z2 / 1000) + w.
For an insulated turbine: (1) Heat loss is negligible: q = 0. (2) Elevation difference across inlet and exit nozzles is negligible: Z1 ≈ Z2 → ΔPE = 0. Substituting these conditions yields the simplified turbine work output:
w = (h1 - h2) + [(V1² - V2²) / 2000]. When kinetic energy changes are also minor relative to enthalpy drop, w ≈ h1 - h2.

Q4: Distinguish between point functions and path functions with thermodynamic examples.

Point Functions: Depend exclusively on the current equilibrium state of the system and are independent of how that state was reached. Their differentials are exact differentials (d), and the cyclic integral is zero (∮ dP = 0, ∮ dT = 0). Examples: Pressure, Temperature, Volume, Internal Energy, Enthalpy, Entropy.
Path Functions: Depend directly on the thermodynamic path or trajectory traversed during the process. Their differentials are inexact differentials (often written with δ or đ), and their values cannot be determined from end states alone. Examples: Work transfer (W) and Heat transfer (Q).

Q5: Why is the Carnot cycle practically unrealizable in modern reciprocating engines?

The Carnot cycle requires two isothermal processes (heat addition and rejection at constant temperature) and two reversible adiabatic / isentropic processes. In an isothermal process, heat must transfer across an infinitesimally small temperature difference, which requires an infinitely slow piston speed. Conversely, an adiabatic process requires zero heat loss, necessitating an infinitely fast piston speed. Alternating between an infinitely slow stroke and an infinitely fast stroke in the same reciprocating mechanical cylinder is mechanically impossible. Hence, the Carnot cycle serves purely as an upper theoretical ceiling for thermodynamic efficiency.