Heat and Mass Transfer (HMT) Comprehensive Academic Curriculum Guide
Heat and Mass Transfer governs the rate equations and fundamental thermodynamic energy transport mechanisms across temperature and concentration gradients. This guide covers steady and transient conduction (Fourier's Law, Biot/Fourier numbers), convective heat transport (boundary layers, Reynolds/Prandtl/Nusselt numbers), radiation heat exchange (Stefan-Boltzmann law, view factors), heat exchanger design (LMTD and NTU methods), and Fick's laws of mass diffusion.
Unit-by-Unit Theoretical Revision
Unit 1: Steady & Transient Conduction
Conduction transfers thermal energy via microscopic atomic lattice vibrations and free electron transport without gross fluid displacement.
- Fourier’s Law of Conduction:
q = -k · A · (dT/dx), where k is thermal conductivity (W/m·K). General 3D conduction equation:∇²T + (q_gen / k) = (1 / α) · (∂T/∂t), where thermal diffusivityα = k / (Ï Â· c_p). - Thermal Resistance Concept: Plane wall:
R_th = L / (k·A); Hollow cylinder:R_th = ln(râ‚‚/râ‚) / (2Ï€ · k · L); Hollow sphere:R_th = (râ‚‚ - râ‚) / (4Ï€ · k · r₠· râ‚‚). Overall Heat Transfer Coefficient:Q = U · A · ΔT_overall. - Critical Thickness of Insulation: Adding insulation to cylindrical/spherical pipes increases conduction resistance but decreases external convective resistance. Critical radius: Cylinder
r_cr = k / h; Spherer_cr = 2k / h. Maximum heat loss occurs atr = r_cr. - Extended Surfaces (Fins): Enhance heat dissipation. Fin efficiency
η_fin = Q_actual / Q_ideal; Fin effectivenessε_fin = Q_with_fin / Q_without_fin(beneficial whenε_fin > 2, favored by high k and low h). - Lumped Parameter Analysis: Valid when internal conduction resistance is negligible compared to surface convection resistance: Biot number
Bi = (h · L_c) / k < 0.1. Temperature decay:(T(t) - T_∞) / (Tâ‚€ - T_∞) = e^(-t / Ï„)where thermal time constantÏ„ = (Ï Â· V · c_p) / (h · A).
Unit 2: Convective Heat Transfer & Dimensionless Numbers
- Newton’s Law of Cooling:
q = h · A · (T_s - T_∞). Hydrodynamic boundary layer thickness (δ) vs Thermal boundary layer thickness (δ_t). - Key Dimensionless Numbers:
- Reynolds Number (Re):
Re = (Ï Â· V · D) / μ = (V · D) / ν(Ratio of inertia forces to viscous forces). - Prandtl Number (Pr):
Pr = ν / α = (μ · c_p) / k(Ratio of momentum diffusivity to thermal diffusivity; Pr ≈ 0.7 for air, Pr > 100 for oils). - Nusselt Number (Nu):
Nu = (h · L) / k_fluid(Ratio of convective to pure conductive heat transfer across fluid boundary). - Grashof Number (Gr):
Gr = (g · β · ΔT · L³) / ν²(Ratio of buoyancy forces to viscous forces in natural/free convection). Rayleigh Number:Ra = Gr · Pr.
- Reynolds Number (Re):
- Forced vs Natural Convection: Forced if
Gr / Re² << 1; Natural ifGr / Re² >> 1; Mixed ifGr / Re² ≈ 1.
Unit 3: Thermal Radiation & Radiation Exchange
- Blackbody Laws: Ideal emitter and absorber.
- Stefan-Boltzmann Law: Total emissive power
E_b = σ · Tâ´whereσ = 5.67 × 10â»â¸ W/m²·Kâ´. - Planck’s Law: Spectral distribution of blackbody hemispherical emissive power.
- Wien’s Displacement Law:
λ_max · T = 2898 μm·K(Peak wavelength shifts inversely with absolute temperature). - Kirchhoff’s Law: At thermal equilibrium, emissivity equals absorptivity:
ε(T) = α(T).
- Stefan-Boltzmann Law: Total emissive power
- Radiation Shape Factor (View Factor Fâ‚â‚‚): Fraction of diffuse radiation leaving surface 1 intercepted by surface 2. Reciprocity relation:
A₠· Fâ‚â‚‚ = Aâ‚‚ · Fâ‚‚â‚. Summation rule for enclosure:Σ F_{1j} = 1. - Radiation Shields: Thin sheets with high reflectivity placed between radiating surfaces. Inserting N identical shields reduces net radiative heat transfer by factor
1 / (N + 1).
Unit 4: Heat Exchangers & Design Methodologies
- Types: Parallel-flow, Counter-flow (thermally superior with uniform temperature gradient), Cross-flow, and Shell-and-Tube (TEMA standards).
- Logarithmic Mean Temperature Difference (LMTD):
Q = U · A · ΔT_lmwhereΔT_lm = (ΔT₠- ΔT₂) / ln(ΔT₠/ ΔT₂). For counter-flow:ΔT₠= T_{h,in} - T_{c,out}andΔT₂ = T_{h,out} - T_{c,in}. - Effectiveness - NTU Method (ε-NTU): Used when outlet temperatures are unknown. Heat capacity rates:
C_h = ṁ_h · c_{p,h}andC_c = ṁ_c · c_{p,c}. Effectivenessε = Q_actual / Q_max = Q / [C_min · (T_{h,in} - T_{c,in})]. Number of Transfer Units:NTU = (U · A) / C_min.
Unit 5: Mass Transfer Fundamentals
- Fick’s First Law of Diffusion:
J_A = -D_{AB} · (dc_A / dx), whereJ_Ais molar flux (mol/m²·s) andD_{AB}is mass diffusivity (m²/s). - Mass Transfer Dimensionless Groups: Schmidt Number
Sc = ν / D_{AB}(momentum vs mass diffusivity); Sherwood NumberSh = (h_m · L) / D_{AB}(convective mass transfer analogue of Nusselt number).
Dimensionless Numbers in Heat & Mass Transfer
| Number | Formula | Physical Significance | Domain |
|---|---|---|---|
| Biot (Bi) | (h · L_c) / k_solid | Internal conduction res. / External convection res. | Transient Conduction |
| Fourier (Fo) | (α · t) / L_c² | Dimensionless time / Rate of heat diffusion | Transient Conduction |
| Nusselt (Nu) | (h · L) / k_fluid | Convection heat transfer / Pure conduction across fluid | Convection |
| Prandtl (Pr) | ν / α = (μ · c_p) / k | Hydrodynamic boundary layer / Thermal boundary layer | Fluid Properties |
| Reynolds (Re) | (Ï Â· V · L) / μ | Inertia forces / Viscous forces | Forced Flow |
| Grashof (Gr) | (g · β · ΔT · L³) / ν² | Buoyancy forces / Viscous forces | Natural Convection |
| Schmidt (Sc) | ν / D_{AB} | Kinematic viscosity / Mass diffusivity | Mass Transfer |
High-Frequency University Exam Questions
Q1: Define the Critical Thickness of Insulation and derive it for an insulated pipe.
The Critical Thickness of Insulation is the outer insulation radius at which total heat transfer from a cylindrical or spherical surface reaches its mathematical maximum. For an insulated circular cylinder of length L, total thermal resistance is R_total = ln(r / râ‚) / (2Ï€ · k · L) + 1 / (2Ï€ · r · h · L). Differentiating with respect to radius r and setting dR_total / dr = 0 yields 1 / (2Ï€ · k · r · L) - 1 / (2Ï€ · r² · h · L) = 0. Simplifying gives the critical radius of insulation: r_cr = k / h. Adding insulation when r < r_cr increases heat loss; adding insulation when r > r_cr decreases heat loss.
Q2: Why is a Counter-Flow heat exchanger thermally superior to a Parallel-Flow heat exchanger?
In a parallel-flow heat exchanger, both fluids enter at the same end; the cold fluid exit temperature can never exceed the hot fluid exit temperature. In a counter-flow configuration, the fluids travel in opposite directions; the exiting cold fluid is heated by the entering hottest fluid, enabling the cold fluid outlet temperature to exceed the hot fluid exit temperature. This produces a much more uniform temperature difference along the entire length, maximizing the Logarithmic Mean Temperature Difference (LMTD) and requiring less surface area (A) for a specified heat transfer rate.
Q3: Explain the physical significance of the Biot Number in transient heat conduction.
The Biot number is the ratio of internal conduction resistance inside a solid to external convection resistance at its boundary: Bi = (h · L_c) / k_solid. When Bi < 0.1, internal conductive resistance is negligible, meaning heat flows rapidly through the solid compared to convection away from its surface; the body remains spatially isothermal at any instant. This condition validates the Lumped Capacitance Method, allowing transient temperature to be evaluated with simple first-order exponential decay equations.